gSKIN® XO-Temp

• Detector Type: Thermoelectric
• Article Number: A-044717
• Sensing Dimensions (mm): 30.0 x 30.0 x 3.3
• Heat Flux Range Min / Max [kW/m²]: -15/ 15
• Heat Flux Resolution per area [W/m2] with gSKIN® DLOG / absolute [μW]: 0.09 / 81.0 (Guaranteed minimum heat flux resolution using the gSKIN® DLOG-4219).
• Surface Material (Sensing Area): Polyamide
• Noise Equivalent Heat Flux per area [W/m²] / absolute [μW]: 0.073 / 65.7 (Experimentally evaluated values under optimal steady state conditions).
• Temperature Dependence of S [%/°C]: 0.25 (The sensitivity increases/decreases as the temperature goes above/below 22.5°C.
• Min./Avg. Sensitivity (S) [μV/(W/m2)]: 10.0/20.0 (Only a reference point).
• Response Time (0-95%) [s]: n/a
• Electrical Resistance [Ohm]: <150 Calibration Temperature Range Min/Max [°C]: -30 / 70 (Refers to the heat flux measurement). Absolut Thermal Resistance [K/W]: ~2.8 Max.
• Compressive Force when clamped [kgf]: >32 (not specified)
• Calibration Accuracy [±%]: 3
• Homogeneity [±%]: 1 (Position dependent signal change across sensing area).
• Operating Temperature Range Min/Max [°C]: -50 / 80
• Linearity with Power [±%]: 1
• Cable Length (c) [cm]: 100
• Thermal conductivity: ~0.4

• In-situ building monitoring
• U-Value determination
• Environmental monitoring e.g. soil

All the use cases are available here!

To discover more application, check our peer-reviewed publication section!

To discover more application, check our peer-reviewed publication section!

The datasheet is available here.