A year full of research conducted with gSKIN Heat Flux Sensors

Thanks to all the scientists who used our sensors in 2017! Below you will find a list of all publications of research conducted with gSKIN® Heat Flux Sensors in 2017. We look forward to further collaboration next year!

Minimal contact formation between hollow glass microparticles toward low-density and thermally insulating composite materials
Zhen Wang, Tao Zhang, Byung Kyu Park, Woo Il Lee, and David J. Hwang
Journal of Materials Science (2017)

Breathing walls: The design of porous materials for heat exchange and decentralized ventilation
Salmaan Craig, Jonathan Grinham
Energy and Buildings (2017)

Inverse models for transient wall heat flux estimation based on single and multi-point temperature measurements
Mahesh Kumar Yadav,Sachin K.Singh, Ahsen Parwez, Sameer Khandekar
International Journal of Thermal Sciences (2017)

Improving the thermal behaviour of bricks by incorporating shape-stabilized phase change materials
A. Serrano, A. Acosta, I. Iglesias, J. F. Rodríguez, and M. Carmona
IOP Conference Series: Materials Science and Engineering (2017)

Isothermal calorimeter for measurements of time-dependent heat generation rate in individual supercapacitor electrodes
Obaidallah Munteshari, Jonathan Lau, Atindra Krishnan, Bruce Dunn, Laurent Pilon
Journal of Power Sources (2018)

Bioinspired microactuators for zero-power heat flux regulation
Moritz Thielen, Emir Sanusoglu, Florian Fürer, Nicolas Ehrenberg, Christofer Hierold
Institute of Electrical and Electronics Engineers (2017)

Spontaneous self-dislodging of freezing water droplets and the role of wettability
Gustav Graeber, Thomas M. Schutzius, Hadi Eghlidi, Dimos Poulikakos
Proceedings of the National Academy of Sciences of the United States of America (2017)

Laser-assisted manufacturing of super-insulation materials
Zhen Wang, Tao Zhang, Byung Kyu Park, Woo Il Lee and David Hwang
Proceedings of SPIE (2017)

Characteristics of Turbulent Airflow Deduced from Rapid Surface Thermal Fluctuations: An Infrared Surface Anemometer
Milad Aminzadeh, Daniel Breitenstein, Dani Or
Boundary-Layer Meteorology (2017)

An easily-deployable wireless sensor network for building energy performance assessment
Mario Frei, Johannes Hofer, Arno Schlüter, Zoltan Nagi
Energy Procedia (2017)

The prebound-effect in detail: real indoor temperatures in basements and measured versus calculated U-values
Caroline Hoffmann, Achim Geissler
Energy Procedia (2017)

Campus Energy Model: Using a Semi-Automated Workflow to Build Spatially Resolved Campus Building Energy Models for Climate Change and Net-Zero Scenario Evaluation
Thomas Suesser, Timur Dogan
Proceedings of the 15th IBPSA Conference (2017)

Calibration of discrete element heat transfer parameters by central composite design
Zongquan Deng, Jinsheng Cui, Xuyan Hou, Shengyuan Jiang
Chinese Journal of Mechanical Engineering (2017)

Thermoelectric characterization of flexible micro-thermoelectric generators
D. Beretta, M. Massetti, G. Lanzani, and M. Caironi
Review of Scientific Instruments (2017)

More news

Anwendungsbeispiel gOMS

Read more

Measuring the U-Value of new GPC building materials with the gSKIN U-Value Kit.

Read more

Assessing the performance of pneumatic cushions with gKIN heat flux sensors

Read more

greenTEG is very honoured to receive the prestigious #1000solutions label from the Solar Impulse Foundation

Read more

greenTEG introduces its Core Body Temperature monitoring solution for early detection of patient deterioration at MEDICA 2019 in Düsseldorf,

Read more

greenTEG novel CBT sensor in the Swiss TV.

Read more

greenTEG wins a grant to develop a new sensing solution for early detection of neurodegenerative diseases.

Read more

greenTEG receives the Seal of Excellence from the EU Horizon 2020 program.

Read more
Read all